Modellsøk
Bil Porsche Classic Boxster 2.5 Convertible
-
1161103000
Brake Master Cylinder
Passer til - 1999Anbefalt antall: 1
-
1663700210
Brake Pad Set, disc brake
-
1661600200
Brake hose, front/rear, 320 mm
-
1697000702
On/off switch with 3 colour options, green/red/yellow, Classic Style, with 12 V bulb
-
8199450200
Battery power off switch
-
-
1696000810
Side marker lamp set, clear, E-marked
-
1696000910
Side marker lamp set, smoked, E-marked
-
1696002010
Side marker lamp set, orange, with E-mark
-
1195900900
Bulb for tail light, 12V, 5W, 15S
-
1195901500
Bulb, capless, panel light, 12 V, 1.2 W, base W2x4.6D
-
1195901700
Bulb, 12V, 5 W, base W2.1x9.5D
-
8199501012
Horn set, 12 V, 310/380 HZ, Ø130 mm
-
1183100300
Body plate for repair, Universal, 625x1250x0.9 mm
-
-
1682001300
Expanding nut for license plate holder, plastic
-
1681650200
Speed nut for bonnet emblem, 2 pieces required
-
-
1698350100
Cap for windshield wiper shaft, black, left/right
-
1681200600
Gas spring for tailgate, 350 N
-
1689300570
Door mirror glass, electric, heated, flat, teardrop design, left
-
1689300580
Door mirror glass, electric, heated, convex, teardrop design, right
-
1688100870
Electric window lifter without motor, left
-
1688100880
Electric window lifter without motor, right
-
1672100310
Pedal kit, alu, Tiptronic
-
1640100500
Track control arm, lower, left/right, with bushings and ball joint
-
1653700110
Axle boot set for CV joint, rear
-
1640400170
Connecting link for stabilizer, front/rear, left
-
1640400180
Connecting link for stabilizer, front/rear, right
-
1650401400
Grommet for stabilizer, rear, Ø19 mm, 2 pieces needed per car
-
1684000300
Strut tower brace, carbon
-
1644600200
Tie rod end, left/right, alu-forging
-
1100500202
Silicone sealant for oil sump, 70 ml. For vehicles without oil sump gasket.
-
-
1116001400
Fuel hose, 10 m, Ø inner 3.5 mm, Ø outer 10.0 mm
-
1625002710
Switch set for sound valves
-
-
1693100200
Coolant temperature sensor
-
1612000200
Oil trap, crankcase breather
-
1613800300
Oil drain plug, non magnetic, alu, M18x1,5x12
-
1620400510
Connecting pipe set from exhaust to catalytic converter. Made of polished stainless steel
-
1620600100
Exhaust rear, OE style, with two Ø80 mm "S" tail pipes, standard sound. Made of stainless steel. With TÜV/EEC approval fo...
-
1620703900
Tail pipe, Dual look, 2xØ80 mm. Made of polished stainless steel
-
1620704000
Tail pipe, OE look, 2xØ95 mm. Made of polished stainless steel
-
1620602800
Exhaust rear, Sport, with two Ø76 mm tail pipes. Made of polished stainless steel. With TÜV/EEC approval for 2.5 L engine
-
1620602900
Exhaust rear, Sport, with one 155x83 mm oval tailpipe. Made of stainless steel. With TÜV/EEC approval for 2.5 L engine
-
1620603000
Exhaust rear, Sport, with one 155x83 mm oval tailpipe. Made of stainless steel. With TÜV/EEC approval
-
1620605200
Exhaust rear, Sport, OE style, with two Ø80 mm tail pipes. Made of polished stainless steel. With TÜV/EEC approval for 2....
-
1620606800
Exhaust rear, Sport, OE style, without tail pipes. Made of stainless steel. With TÜV/EEC approval for 2.5 L engine
-
1620800600
Exhaust rear, Sport, OE style, "Super Sound", without tail pipes. Made of stainless steel
-
1620350100
Screw plug for lambda hole, M18x1.5 mm
-
1621400500
Exhaust clamp, 45x75 mm, stainless steel
-
-
1621700910
Mounting kit for catalytic converter. The kit includes clamps, gaskets, nuts and bolts
-
1625001400
Retaining plate for exhaust mounting, 5 mm
-
1627200300
Condenser for air condition, 330x273x16 mm
